Pin jumper 2 – Banks Power 2001-2004 (LB7) Chevy_GMC 6.6L Duramax Turbo-Diesel Pickups User Manual
Page 2
The Banks OttoMind Stinger has been
designed with two power levels.
These levels have been developed
to work within the specifications of
the stock transmission. The OttoMind
Stinger is designed to detect the
transmission type (auto or manual) of
the vehicle. The OttoMind Stinger will
select the power level appropriate for
the vehicle’s transmission.
The OttoMind Stinger will select
the highest level when installed
on a vehicle with an automatic
transmission. When installed on a
vehicle with a manual transmission
the Stinger will select lower the level
to prevent the clutch from slipping
while towing heavy loads.
If the factory clutch is upgraded to an
aftermarket clutch that can handle
the increased torque and horsepower
of the higher power level of the
OttoMind Stinger the 2-pin jumper
in the Banks Stinger wire harness
shown in the illustration below can
be removed to switch to the higher
power level.
Caution: The 2-Pin Jumper should
only be removed after the factory
clutch has been upgraded to
an aftermarket clutch capable
of the increased torque and
horsepower. Failure to upgrade the
clutch prior to removing the jumper
may result in damage to the factory
clutch. Banks is NOT responsible for
clutch and/or transmission damage.
Note: In the event that the factory
clutch is reinstalled, the 2-pin jumper
can be reinstalled onto the wire
harness to return the Stinger module
to the original manual transmission
power level.
2-Pin Jumper
2
96773 v.7.0