Installation and setup – Cobalt Digital COMPASS 9374-EMDE Quad-Stream SDI – AES – MADI Embedder_De-embedder User Manual
Page 29
937X-OM (V1.3)
9374-SERIES PRODUCT MANUAL
2-7
Installation and Setup
Installing a Rear Module
RM20-9372-E Rear Module
Provides the following connections:
• Two 3G/HD/SD-SDI video input BNCs (
SDI IN A
and SDI IN B
)
• Eight AES I/O BNC (AES-3id) input/outputs
(
AES 1
thru
AES 8
; I/O choice for each connection is
software-configurable; 8 ports total)
•
MADI IN
and
MADI OUT
MADI AES-10 BNC input
and output connectors
• Two analog unbalanced (“RCA”) audio monitor
outputs (
AN-AUD OUT L
and
AN-AUD OUT R
)
• Four 3G/HD/SD-SDI video output BNCs
(2x
SDI OUT A and 2x SDI OUT B
)
RM20-9372-F Rear Module
Provides the following connections:
• Two 3G/HD/SD-SDI video input BNCs (
SDI IN A
and SDI IN B
)
• Eight AES I/O BNC (AES-3id) input/outputs
(
AES 1
thru
AES 8
; I/O choice for each connection is
software-configurable; 8 ports total)
•
MADI IN
and
MADI OUT
MADI AES-10 BNC input
and output connectors
• Two analog unbalanced (“RCA”) audio monitor
outputs (
AN-AUD OUT L
and
AN-AUD OUT R
)
• Two RS-485 ports (
COM 1
and
COM 2
); each
assignable as Input or Output-LTC Encoder A
thru Output-LTC Encoder D outputs
• Four 3G/HD/SD-SDI video output BNCs
(2x
SDI OUT A and 2x SDI OUT B
)
Note: • COM ports functional only on card equipped
with option +LTC.
• Rear module available equipped with
High-Density BNC (HDBNC) or DIN1.0/2.3
connectors as:
RM20-9372-F-HDBNC or
RM20-9372-F-DIN, respectively.
Table 2-1
9374-Series Card Rear Modules — continued
9374 Card Rear Module
Description