Troubleshooting, Error and failure indicator overview, Troubleshooting -30 – Cobalt Digital COMPASS 9374-EMDE Quad-Stream SDI – AES – MADI Embedder_De-embedder User Manual
Page 62: Error and failure indicator overview -30, Troubleshooting (p. 3-30)
3
Troubleshooting
3-30
9374-SERIES PRODUCT MANUAL
937X-OM (V1.3)
Troubleshooting
This section provides general troubleshooting information and specific
symptom/corrective action for the 9374-Series card and its remote control
interface. The 9374-Series card requires no periodic maintenance in its
normal operation; if any error indication (as described in this section) occurs,
use this section to correct the condition.
Error and Failure Indicator Overview
The 9374-Series card itself and its remote control systems all (to varying
degrees) provide error and failure indications. Depending on how the
9374-Series card is being used (i.e, standalone or network controlled through
DashBoard™, check all available indications in the event of an error or
failure condition. The various 9374-Series card and remote control error and
failure indicators are individually described below.
Note:
The descriptions below provide general information for the various status and
error indicators. For specific failures, also use the appropriate subsection
listed below.
• Basic Troubleshooting Checks (p. 3-34)