Cobalt Digital COMPASS 9374-EMDE Quad-Stream SDI – AES – MADI Embedder_De-embedder - Manual (Page 42)

3
9374-Series Function Submenu List and Descriptions
3-10 9374-SERIES PRODUCT MANUAL 937X-OM (V1.3)
Table 3-1 9374-Series Function Submenu List
Input Meters
Provides PPM meters in 16-channel groups for card SDI
inputs, MADI inputs and AES inputs. Also provides Direct
Monitor routing that allows any channel to be directly
copied to the card stereo analog audio monitor outputs.
Note: 9372 and 9371 cards do not have SDI C and SDI D meter rows. 9372 has SDI A and SDI B meter rows; 9371 has SDI A
meter row.
• • •
Enable Display and Timeout controls allow meter display to be turned on only
when needed. (Card display/refresh speed in DashBoard™ is enhanced when
dynamic displays are disabled when not needed.)
Analog L Ch and Analog R Ch radio buttons provide direct routing of selected channels to the card stereo analog audio
monitor outputs. Selecting another monitor input clears any prior selection. (Selections made here are reflected on the AES/
Analog Crosspoint tab, with changes made on that tab correspondingly also reflected here.)
SDI A IN 16-channel meter row is shown above. The following 16-channel rows are displayed:
•
SDI A IN – SDI A embedded channels 1 - 16 (short form ID: SA01 - SA16)
•
SDI B IN – SDI B embedded channels 1 - 16 (short form ID: SB01 - SB16)
•
SDI C IN – SDI C embedded channels 1 - 16 (short form ID: SC01 - SC16)
•
SDI D IN – SDI D embedded channels 1 - 16 (short form ID: SD01 - SD16)
•
MADI IN 1-16 – MADI channels 1 - 16 (short form ID: MA01 - MA16)
•
MADI IN 17-32 – MADI channels 17 - 32 (short form ID: MB01 - MB16)
•
MADI IN 33-48 – MADI channels 33 - 48 (short form ID: MC01 - MC16)
•
MADI IN 49-64 – MADI channels 49 - 64 (short form ID: MD01 - MD16)
•
AES IN 1-16 – AES-3id channels 1 - 16 (short form ID: A01 - A16)
Note: AES channel controls have a Direction control to set a channel pair as a card input or output.
Pressing either button of a channel pair toggles between Input and Output function. In this example, pair 1 (channels 1/2) are set
as Input (turquoise color) and pair 2 (channels 3/4) are set as Output (blue color). (Similar controls appear on the Output Meters
tab and are ganged with these.)