Cobalt Digital COMPASS 9067 Upconverter - Manual (Page 38)

3
Accessing the 9067 Card via Remote Control
3-6 9067 PRODUCT MANUAL 9067-OM (V4.4)
Accessing the 9067 Card Using a Cobalt ® Remote Control Panel
Press the Select Device key and select a card as shown in the example below.
Card Access/Navigation
Tree Pane
Card Info
Pane
Card Function Submenu
and Controls Pane
9067_DB_ACCESS3A3V4.PNG
This display shows the list
order number of the device that
is ready for selection
This display shows the devices assigned to the Control Panel.
• Rotate any knob to select from the list of devices. The device selected
using a knob is displayed with a reversed background (in this example,
“1 9067 - Receiver 21 Input Processing”).
• Directly enter a device by entering its list number using the numeric
keypad, and then pressing Enter or pressing in any knob).
9067_3366_3392.JPG