TC Electronic TouchMonitor User Manual
Page 26
Getting Started | Working with Instruments and Presets
EN-26
Manual | TouchMonitor 7“/9“ Series common
If you want to load another preset, please proceed as follows:
2. Touch the preset you want to use.
The current selected and used preset is marked as active.
In normal display mode, the name of the active preset is dis-
played in the lower right edge of the screen.
3. The selected preset is loaded. The unit automatically switches
back to normal display mode and displays the selected preset.
1. Touch
the
Load Preset key in the right section of the control bar.
A menu page with a list of presets available is shown.
1.
2.
Depending on the unit‘s type the functions like Loudness or
Vectorscope shown on the screenshots require further software
licences being activated (for details please see next chapter).