TC Electronic XO24 - Manual (Page 9)

7
FRONT PANEL OVERVIEW
OUTPUT
On/Off keys on the Output for
each of the four channels.
In Edit mode these keys give
access to edit the Output level
parameter.
RECALL
In Recall mode you select
which preset to recall using the
ADJUST encoder and press
ENTER to confirm.
STORE
Press to STORE. Select a
storing location using the
ADJUST wheel and press
ENTER to confirm.
ENTER
The ENTER key is used to
confirm various operations
such as Store and Recall.
LOCK
The LOCK key is used to
lock/unlock the XO24 front
panel keys. Default setting is
“locked”.
ADJUST encoder
The ADJUST Encoder is used
to change values on various
parameters - especially in the
Edit mode.
EDIT
Press to enter Edit mode and
select which parameter to edit
by pressing the parameter
keys.
SETUP
Press to enter the Setup
menu. In the Setup menu you
will find parameters such as
Lock setup, various Level
settings and Display Viewing.
CURSOR keys
Use the CURSOR keys to
scroll between parameters in
the various menus.
Input A Input B
XO24 US_3101.qxd 31-01-2005 10:59 Page 7