Rainbow Electronics MAX5484 - Manual (Page 2)

MAX5481–MAX5484
10-Bit, Nonvolatile, Linear-Taper Digital
Potentiometers
2 _______________________________________________________________________________________
ABSOLUTE MAXIMUM RATINGS
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
V
DD
to GND ...........................................................-0.3V to +6.0V
V
SS
to GND............................................................-6.0V to +0.3V
V
DD
to V
SS
.............................................................-0.3V to +6.0V
H, L, W to V
SS
..................................(V
SS
- 0.3V) to (V
DD
+ 0.3V)
CS, SCLK(INC), DIN(U/D), SPI/UD to GND ..-0.3V to (V
DD
+ 0.3V)
Maximum Continuous Current into H, L, and W
MAX5481/MAX5483.........................................................±5mA
MAX5482/MAX5484......................................................±1.0mA
Maximum Current into Any Other Pin ...............................±50mA
Continuous Power Dissipation (T A
= +70°C)
16-Pin TQFN (derate 17.5mW/°C above +70°C) .....1398.6mW
14-Pin TSSOP (derate 9.1mW/°C above +70°C) ..........727mW
Operating Temperature Range ...........................-40°C to +85°C
Junction Temperature ......................................................+150°C
Storage Temperature Range .............................-60°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
ELECTRICAL CHARACTERISTICS
(V
DD
= +2.7V to +5.25V, V
SS
= GND = 0, V
H
= V
DD
, V
L
= 0, T
A
= -40°C to +85°C, unless otherwise noted. Typical values are at V
DD
= +5.0V, T
A
= +25°C, unless otherwise noted.) (Note 1)
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
DC PERFORMANCE (MAX5481/MAX5482 programmable voltage-divider)
Resolution N 10 Bits
V DD = 2.7V ±2
Integral Nonlinearity (Note 2) INL
V DD = 5V ±2
LSB
V DD = 2.7V ±1
Differential Nonlinearity (Note 2) DNL
V DD = 5V ±1
LSB
End-to-End Resistance
Temperature Coefficient
TC R 35 ppm/°C
Ratiometric Resistance
Temperature Coefficient
5 ppm/°C
MAX5481 -4 -2.5 0
Full-Scale Error FSE
MAX5482 -4 -0.75 0
LSB
MAX5481 0 +3.3 +5
Zero-Scale Error ZSE
MAX5482 0 +1.45 +5
LSB
MAX5481 7.5 10 12.5
End-to-End Resistance R H-L
MAX5482 37.5 50 62.5
k Ω
Wiper Capacitance C W 60 pF
MAX5481 6.3
Resistance from W to L and H
W at code = 15, H and L
shorted to V
SS , measure
resistance from W to H, Figures
1 and 2
MAX5482 25
k Ω
DC PERFORMANCE (MAX5483/MAX5484 variable resistor)
Resolution N 10 Bits
V DD = 2.7V -1.6
V DD = 3V -4 -1.4 +4 Integral Nonlinearity (Note 3) INL_R
V DD = 5V -4 -1.3 +4
LSB
V DD = 2.7V +0.45
V DD = 3V -1 +0.4 +1 Differential Nonlinearity (Note 3) DNL_R
V DD = 5V -1 +0.35 +1
LSB
Variable-Resistor Temperature
Coefficient
TC VR V DD = 3V to 5.25V; code = 128 to 1024 35 ppm/°C