Rainbow Electronics RF02 - Manual

RF02
RF02 Universal ISM Band
FSK Transmitter
RF02
DESCRIPTION
Hope’s RF02 is a single chip, low power, multi-channel
FSK transmitter designed for use in applications requiring
FCC or ETSI conformance for unlicensed use in the 433, 868,
and 915 MHz bands. Used in conjunction with RF01, Hope’s
FSK receiver, the RF02 transmitter produces a flexible, low
cost, and highly integrated solution that does not require
production alignments. All required RF functions are
integrated. Only an external crystal and bypass filtering are
needed for operation. The RF02 offering a higher output
power and an improved phase noise characteristic.
The RF02 features a completely integrated PLL for easy
RF design, and its rapid settling time allows for fast frequency hopping, bypassing multipath fading and
interference to achieve robust wireless links. In addition, highly stable and accurate FSK modulation is
accomplished by direct closed-loop modulation with bit rates up to 115.2 kbps. The PLL’s high resolution
allows the use of multiple channels in any of the bands.
The integrated power amplifier of the transmitter has an open-collector differential output that directly
drive a loop antenna with programmable output level. No additional matching network is required. An
automatic antenna tuning circuit is built in to avoid costly trimming procedures and de-tuning due to the
“hand effect”.
For low-power applications, the device supports automatic activation from sleep mode. Active mode
can be initiated by several wake-up events (on-chip timer timeout, low supply voltage detection).
Tel: +86-755-86096587 Fax: +86-755-86096602 E-mail: [email protected] http://www.hoperf.com