Rainbow Electronics 900 - Manual (Page 114)

FLYFOT-M260-MODULE
Page: 114 / 239
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.
Values when CmdType=10 (Send USSD)
<TextInfo>
Text information in ASCII format.
Values when CmdType=11 (Setup Event List)
<Evt>
1: Reporting asked for an ‘Idle Screen’ event.
2: Reporting asked for an ‘User Activity’ event.
3: Reporting asked for ‘Idle Screen’ and ‘User Activity’ events.
4: Cancellation of reporting event.
Rem: For the UCS2 format texts are displayed in Hex ASCII format. Example: When the SIM sends
a TextString containing 0x00 0x41 the text displayed is “0041”.
12.5.4 Error codes
+ CME ERROR: 3
Operation not allowed. This error is returned when a wrong parameter
is detected.
+CME ERROR: 4
Operation not supported. This error is returned when the user wants to get
information about a SIM ToolKit proactive command (with SIM ToolKit
functionality not activated.)
+CME ERROR: 518
SIM ToolKit indication not received. This error is returned when the SIM
Toolkit indication (+STIN) has not been received.
12.5.5 Example
Initially, all facilities are activated, the PIN is not required and SIM toolkit functionality is activated.
AT+CMEE=1
Enable the reporting of mobile equipment errors
OK
AT+WIND=15
Set FLYFOT indications
OK
AT+STSF?
+STSF: 1,”5FFFFFFF7F”,3 SIM ToolKit functionality activated with all facilities.
OK
+STIN: 0
The main menu has been sent from the SIM.
AT+STIN?
+STIN: 0
OK
AT+STGI=0
Get information about the main menu
+STGI: ”SIM TOOLKIT MAIN MENU” Main menu contains 3 items.