Rainbow Electronics 900 - Manual (Page 149)

FLYFOT-M260-MODULE
Page: 149 / 239
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.
15.8 Result code suppression Q
15.8.1 Description :
This command determines whether the mobile equipment sends result codes or not
15.8.2 Syntax :
Command syntax : ATQ<n>
Command
Possible responses
ATQ0
Note : DCE transmits result codes OK
Note : Command valid
ATQ1
Note : Result codes are suppressed and not
transmitted Note : No response
15.8.3 Defined values :
<n>
0 : DCE transmits result codes
1 : Result codes are suppressed and not transmitted
15.9 DCE response format V
15.9.1 Description :
This command determines whether the DCE response format uses or not the header characters
<CR><LF>, and the result codes are provided as numeric or verbose.
15.9.2 Syntax :
Command syntax : ATV<n>
Command
Possible responses
ATV0
Note : DCE transmits limited headers and trailers
and numeric result codes 0
Note : Command is valid (0 means OK)
ATV1
Note : DCE transmits full headers and trailers
and verbose response text OK
Note : Command valid