Yamaha CLP-970A - Manual (Page 98)

98
CLP-970A
CLP-970A/970AM/970AC: Keyboard Stand Assembly
8.
Set the adjuster.
After completing the assembly, please check the
following.
• Are there any parts left over?
• Review the assembly procedure and correct any
errors.
• Is the Clavinova clear of doors and other movable
fixtures?
• Move the Clavinova to an appropriate location.
• Does the Clavinova make a rattling noise when
you shake it?
• Tighten all screws.
• Does the pedal box rattle or give way when you
step on the pedals?
• Turn the adjuster so that it is set firmly against the
floor.
• Are the pedal and power cords inserted securely
into the sockets?
• Check the connection.
• If the main unit creaks or is otherwise unsteady
when you play on the keyboard, refer to the assem-
bly diagrams and retighten all screws.
Rotate the adjuster until it comes in
firm contact with the floor surface.
Speaker box
Key cover
When moving the instrument after assembly,
always hold the bottom of the main unit.
Do not hold the keyboard cover or speaker box.
Improper handling can result in damage to the
instrument or personal injury.