Yamaha CLP-970A - Manual (Page 21)

CLP-970A
21
Part Names
Connectors
D LCD buttons
E LCD
Use the LCD button A, B, C, or D to select the contents displayed on the LCD.
Check the screen located in the center of the top panel after every operation. A
voice name appears on the screen when you turn on the power to the unit.
G [EXIT] button
When you press this button, the unit returns to the default screen (the screen that indicates a voice
name(s) and is displayed when the power is turned on).
MIDI
HOST SELECT
PC-1 PC-2
Mac MIDI
TO HOST
AUX PEDAL
PEDAL
OUT IN THRU
L / L+R R
AUX IN
L / L+R R
AUX OUT
[
U V
W X Y
Z
U AUX OUT [R] [L/L+R]..........................P56
V AUX IN [R] [L/L+R] .............................P57
W [AUX PEDAL] ......................................P57
X [TO HOST] ..........................................P57
Y HOST SELECT ..................................... P57
Z MIDI [IN] [OUT] [THRU] .................... P58
[ [PEDAL] .............................................. P58
\ Panel logos
GM System Level 1
“GM System Level 1” is an addition to the MIDI stan-
dard which guarantees that any data conforming to the
standard will play accurately on any GM-compatible
tone generator or synthesizer from any manufacturer.
You can connect your computer or sequencer to the MIDI
IN or TO HOST connector on the CLP-970A to play “GM
System Level 1”-conformed music data on the CLP-970A
and control it from a connected computer or sequencer.
bottom surface
XG Format
XG is a new Yamaha MIDI specification which significantly expands and
improves on the “GM System Level 1” standard with greater voice handling
capacity, expressive control, and effect capability while retaining full compati-
bility with GM.
You can connect your computer or sequencer to the MIDI IN or TO HOST
connector on the CLP-970A to play “XG”-conformed music data on the CLP-
970A and control it from a connected computer or sequencer.
A B
C D
NO YES