Selecting the chorus type [chorus type, Setting the chorus depth [chorussend, Setting the chorus on/off [chorusonoff – Yamaha CLP-970A User Manual
Page 74: Selecting the variation effect type [variationtype, Detailed settings for the voices [voice setting, See the procedur e on page 66, Setting range
74
CLP-970A
Detailed settings for the voices [VOICE SETTING]
In Dual mode:
Setting range:
0 - 127
You cannot set this parameter for the voice parts “Left” and
“Left
×
Layer.”
See the procedure on page 66.
Setting range:
Chorus
Adds a rich, spacious sound.
Celeste
Adds swell and a spacious sound.
Flanger
Adds swell effects of an ascending or
descending jet plane.
See the procedure on page 66.
In Dual mode:
Setting range:
0 - 127
You can set the [CHORUS] button on or off for each
voice. When you select a voice, the chorus on/off set-
ting for the voice automatically changes according to
this parameter.
Even if this parameter is turned on, the chorus effect is dis-
abled if the ChorusSend parameter is set to 0.
See the procedure on page 66.
Setting range:
On/Off
You can select other effects (than reverb and chorus).
See the procedure on page 66.
Selecting the chorus type [Chorus
Type]
Setting the chorus depth [Cho-
rusSend]*
A
B
C
D
NO
YES
Voice for editing (Voice 1 or Voice 2)
TIP
A
B
C
D
NO
YES
A
B
C
D
NO
YES
Setting the chorus on/off
[ChorusOnOff]
Selecting the variation effect
type [VariationType]
A
B
C
D
NO
YES
Voice for editing (Voice 1 or Voice 2)
TIP
A
B
C
D
NO
YES
A
B
C
D
NO
YES