Peterson Sonuus Wahoo - Manual (Page 27)

Wahoo © Copyright 2012 Sonuus Limited 27
Owner’s Manual
Custom settings
Further configurability of the Wahoo is possible through custom. This lets you change the setup of
the Wahoo to suit your own instruments or personal preferences. For example, you can adjust the
display
LED brightness to a very low level to prolong battery life or to suit working in a darkened
studio.
The custom settings are different from all of the other parameters: they affect the Wahoo’s set-up,
not the set-up of the current preset
i.e., they are global settings. The custom settings are not stored
in a preset, they are stored in the Wahoo itself. They take effect from when they are changed. They
are not changed by switching from one preset to another.
To make changes to the custom sub-parameters, enter
custom mode by pressing and holding the
MODE knob for 2s.
Custom
sub-
parameter
Default Range Description
LEd 40 1–100
LED brightness: 1 is minimum, 100 maximum. Reducing the LED
brightness is useful for dark environments and for battery saving.
int gtr
gtr
bA4
bA5
Instrument (used for pitch-tracking and envelope-tracking)
guitar (perfect for guitar, but also good for 4-string bass. Use this
unless you need optimal pitch-tracking of the lowest notes.)
4-string bass (best to track the lowest notes of 4-string bass, but
also works well with 5-string bass)
5-string bass (best to track the lowest notes of 5-string bass)
SEn 0 −60–60
Applies a global adjustment for envelope mode sensitivity (SEn) to
compensate for instruments with different output levels.
Gives a range of ±24dB.
P.En on oFF, on
Pedal enable. Allows you to enable the effect by moving the
footpedal to the “toe-down” position rather than having to first
press the footswitch.
g.At 0 0–200
Noise gate attack—how quickly the noise gate moves the filter
cutoff frequency when the output falls to below the threshold set.
FS.t 4 (2s) oFF, 1–8
Footswitch time. Time in 500ms steps that footswitch is held to
enter and exit foot-operated preset selection mode.