PowerWalker VMWare ESX 3.5, 4.0, 4.1 - Manual (Page 6)

5
Figure 5
2) Install Software
a. Log in to Console page of VMware ESX system. Then, enter the following address “cd
/vmfs/volumes/storage1/”. This can also be varied due to different storage name. (shown in
figure 6)
Figure 6.
b. Run “tar -zxvf VPVMShutdownWizard.tar.gz” command to unzip the compressed file. Refer
to figure 7.
Figure 7.
c. Key in “cd VPVMShutdownWizard” to access the VPVMShutdownWizard catalogue. Then run
“./INSTALL” to install and auto run the software. Refer to figure 8.