PowerWalker VMWare ESX 3.5, 4.0, 4.1 - Manual (Page 8)

7
2-3. Stop
Key in the path of “cd /usr/share/VPVMShutdown/ShutdownWizard/” and then, run the command of
“./stop” as shown below.
Figure 11.
2-4. Uninstall
Key in the path of “cd /usr/share/VPVMShutdown/ShutdownWizard/” to enter the installation menu.
Then, run the command of “./UNINSTALL” to uninstall the software. (Refer to figure 12)
Figure 12