PowerWalker VMWare ESX 3.5, 4.0, 4.1 - Manual (Page 7)

6
Figure 8.
d. After installation , the default path is set to “/usr/share/VPVMShutdown/ShutdownWizard/” as
shown in Figure 9.
Figure 9.
2-2. Quick Start
It will run automatically after installation. If it’s not automatically running, you may key in the “ps -e |
grep ShutdownWizard” for double checking. Once it’s not running as requested, key in “cd
/usr/share/VPVMShutdown/ShutdownWizard/” to enter installation menu and then enter “./run” to
manually start the software.
Figure 10.