PowerWalker ViewPowerMini - Manual (Page 20)

19
service provided in LAN, the default IP will display as “192.168.102.230”, Net mask
as “255.255.255.0” and default gateway as “0.0.0.0”. Simply click “Apply” button
to apply this change.
l Use a static IP address
It will allow users to enter static IP address for SNMP devices. When entering IP
address, Subnet mask, and gateway address, simply click “Apply” button to apply
this change.
Part B: Enter the DNS and click “Apply” button. Refer to section B in Diagram 3­12.
Online upgrade
Diagram 3­12
There are three methods for online upgrade:
l Upgrade the selected devices: It will upgrade all SNMP devices listed in the IP list.
l Upgrade all un­upgraded devices: It will only upgrade SNMP devices which are not
using the same version as current SNMP device is.
l Force to upgrade all devices: No matter what kinds of version are used for SNMP
devices listed in the IP list, it will upgrade to the latest version for all SNMP devices.
Refer to Diagram 3­12.
Step1: select the FTP server IP address. Refer to Diagram 4­6.
NOTE: If applying upgrade for Modbus Web Server in LAN, FTP server IP address will be