PowerWalker ViewPowerMini - Manual (Page 55)

54
Diagram 5­23
NOTE: This screen may be different for different types of UPSs.
Step 2 Select monitoring parameters on left­hand tab to switch diagram.
l Input voltage monitoring shows any change for input voltage.
l Output voltage monitoring shows any change for output voltage.
l Input frequency monitoring shows any change for input frequency
l Output frequency monitoring shows any change for output frequency.
l Load level monitoring shows any change for connected load level
l Battery capacity monitoring shows any change for connected battery capacity.
l UPS temp. Monitoring shows any temperature change for monitored UPS.
5.4.1.4. Environmental information
In the Environmental information window, it shows the current temperature and
humidity.
Select Status >> Environmental information. Refer to Diagram 5­24