Peerless-AV ACC919 - Installation - Manual

1 of 3 ISSUED: 07-18-05 SHEET #: 095-9245-4 06-13-11
Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307
FOR VESA 100 MOUNTING PATTERN:
Choose hole pattern as shown below. Attach hook
bracket to back of display using four M4 x 10mm
screws (AA) as shown below.
Installation and Assembly - Security Fasteners for 10" - 25"
LCD Displays with VESA
® 75, VESA 100, VESA 200 x 100 and
VESA 200 x 200 Mounting Patterns
Model: ACC919
IMPORTANT! Read entire instruction sheet before you start installation and assembly.
CC
FF
BB EE
DD
GG
• If screws don't get three complete turns in the display inserts or if screws bottom out and bracket is still not tightly
secured, damage may occur to display or product may fail.
WARNING
AA
NOTE: For VESA 200mm and 200 x 100mm
patterns, see following page.
FOR VESA ® 75 MOUNTING PATTERN:
Choose hole pattern as shown below. Attach hook
bracket to back of display using four M4 x 10mm
screws (AA) as shown below.
*NOTE: If hole pattern is in a pocket, attach hook
bracket to back of display using four M4 x 20mm
screws (BB) and four retaining spacers (FF) as
indicated below.
AA
BRACKET
AA BRACKET
HH
Description Qty. Part #
AA M4 x 10 mm serrated washer head socket pin screw 4 510-1060
BB M4 x 20 mm serrated washer head socket pin screw 4 510-1061
CC M6 x 12 mm serrated washer head socket pin screw 4 510-1050
DD M6 x 20 mm serrated washer head socket pin screw 4 510-9554
EE M6 x 30 mm serrated washer head socket pin screw 4 510-1067
FF .198" x .313" x .437" H retaining spacer 4 590-5005
GG 4 mm security allen wrench 1 560-9646
HH M5 X 6 mm socket pin screw 5 520-1114
Parts List
1-1 1-2
FF
*For displays with a
hole pattern in a pocket,
spacers (FF) go between
hook bracket and display.