Peerless-AV ACC919 - Installation - Manual (Page 2)

2 of 3 ISSUED: 07-18-05 SHEET #: 095-9245-4 06-13-11
Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307
HH
AA
CC
Attaching Adapter Plate to Screen with VESA 200 x 100 or 200 x 200
Mounting Pattern
Attach hook bracket to adapter plate using four
M5 x 6mm screws (HH) and #10 washers as shown.
FOR VESA 200 x 100 MOUNTING PATTERN:
Choose hole pattern as shown below. Attach adapter
plate to back of screen using four
M4 x 10mm screws (AA) as shown below.
*NOTE: If screw (AA) gets less than three threads of
engagement, attach adapter plate to back of screen
using four M4 x 20mm screws (BB) and four spacers
(FF) as indicated below.
FOR VESA 200 x 200 MOUNTING PATTERN:
Choose hole pattern as shown below. Attach adapter
plate to back of screen using four
M6 x 12mm screws (CC) as shown below.
*NOTE: If screw (CC) gets less than three threads of
engagement, attach adapter plate to back of screen
using four M6 x 20mm screws (DD). If screw (DD)
still gets less than three threads of engagement, use
four M6 x 30mm screws (EE).
2-1 2-2
• If screws don't get three complete turns in the screen inserts or if screws bottom out and adapter plate is still not
tightly secured, damage may occur to screen or product may fail.
WARNING
*For screens with a
hole pattern in a pocket,
spacers (FF) go between
adapter plate and screen.
FF
2
BRACKET
#10 WASHER
ADAPTER