Peerless-AV ACC919 - Installation - Manual (Page 3)

3 of 3 ISSUED: 07-18-05 SHEET #: 095-9245-4 06-13-11
Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307
© 2011 Peerless Industries, Inc. All rights reserved.
Peerless is a registered trademark of Peerless Industries, Inc.
To attach display to wall mount, lower hook bracket
into pockets of wall mount. Once clips are engaged,
push down to seat clips into pockets. Insert and
tighten M5 x 6mm screws (HH) to lock screen to
wall mount as shown in fi gure 3.1.
To remove screen from mount, loosen screw (HH)
and lift screen off of mount.
Installing and Removing Flat Panel Display
3
DISPLAY
HH
fi g. 3.1
• Do not lift more weight than you can handle.
Use additional man power or mechanical lifting
equipment to safely handle placement of the screen.
• Failure to lock hook bracket with screw (HH) can
cause screen to come off mount if hit accidentally.
WARNING
POCKET
CLIP