Peerless-AV EXC-W - Installation - Manual (Page 8)

8 of 11 ISSUED: 1-11-08 SHEET #: 055-9495-3 09-18-12
Visit the Peerless Web Site at www.peerless-av.com For customer care call 1-800-865-2112 or 708-865-8870.
Installing Projector Mount
4
CEILING INSTALLATION
Installing PRS projector mount with wall installation: Position PRS projector mount (not included) to the
orientation shown in fi gure 4.3 and attach to horizontal mounting plate (F) using two M5 x 16 mm socket pin
screws (G), four fl at washers (O) and two locknuts (N).
Installing PRS projector mount with ceiling installation: Attach vertical mounting plate (E) to PRS projector
mount (not included) using two M5 x 16 mm socket pin screws (G), four fl at washers (O) and two locknuts (N) as
shown in fi gure 4.4.
Note: Placing washer (O) and nut (N) combination on inside of PRG or PRS projector mount (not included) fi rst
while attaching mounting bracket (E or F) can make installation easier as shown in fi gure 4.5.
N
O
N
O
E
G
G
F
ARROW
INDICATES
FRONT OF
MOUNT
ARROW
INDICATES
FRONT OF
MOUNT
CEILING INSTALLATION
PRG PROJEC-
TOR MOUNT (NOT
INCLUDED)
PRG PROJECTOR
MOUNT (NOT
INCLUDED)
N
O
G
F
PRS PROJECTOR MOUNT
(NOT INCLUDED)
HOLE INDICATES
FRONT OF MOUNT
WALL INSTALLATION
(EXCEPT FOR EXC MODELS)
HOLE INDICATES
FRONT OF MOUNT
N
O
G
E
PRS PROJECTOR MOUNT
(NOT INCLUDED)
fi g. 4.1
fi g. 4.2
fi g. 4.3
fi g. 4.4
fi g. 4.5
PRS PROJECTOR
MOUNT (NOT
INCLUDED)
PLACE WASHER (O) AND
NUT (N) COMBINATION
FIRST
N
O
WALL INSTALLATION
(EXCEPT FOR EXC MODELS)
Installing PRG projector mount with ceiling installation: Attach vertical mounting plate (E) to PRG projector
mount (not included) using two M5 x 16 mm socket pin screws (G), four fl at washers (O) and two locknuts (N) as
shown in fi gure 4.1.
Installing PRG projector mount with wall installation: Position PRG projector mount (not included) to the
orientation shown in fi gure 4.2 and attach to horizontal mounting plate (F) using two M5 x 16 mm socket pin
screws (G), four fl at washers (O) and two locknuts (N).
O O
O
O