Peerless-AV WSP724-W - Installation - Manual (Page 3)

ISSUED: 11-14-06 SHEET #: 024-9010-1
Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.
3 of 4
Drill 1/2" (13mm) dia. holes through drywall and studs at locations corresponding to wall plate. Insert togglers (D)
as shown below...
© 2005 Peerless Industries, Inc. All rights reserved.
Peerless is a registered trademark of Peerless Industries, Inc.
All other brand and product names are trademarks or registered trademarks of their respective owners.
Rotate toggler (D)
clockwise to wedge it
against inside walls
of metal stud.
Push into hole.
Pivot end of toggler (D).
Slide plastic cap
forward while pulling
back firmly on ring.
Break off excess.
Align wall plate
with hole in wall
and fasten using
1/4-20 screw (C).
wall plate
C
drywall
metal stud