Knape&Vogt BYP-60AFS3 Series - Manual (Page 3)

4
HANG DOORS
• Mount rear door first by tilting door back
and resting hangers on rear rail, tilt level.
• Repeat for front door on front rail.
SLIDING DOOR HARDWARE - BY PASS
Assembly
Instructions
#310299_C (1013)
5
ADjuSt AND FINISH
• Adjust door to square with sides of door opening as shown.
• To lock in place, drill 3/32" hole and secure with (#8 x 3/4") screw.
(E)
• Install door guide where doors overlap.
• Install door stop to back
side of front door to
keep rear door pull
accessible when front
door is opened.