Braun 7680 SyncroPro System - Manual (Page 9)

9
Keeping your shaver in top shape
Automated cleaning
The Braun Clean&Renew™ takes care of all cleaning and
lubrication needs of your shaver. Please refer to the
separate use instructions.
Manual cleaning
For easy cleaning after each shave, switch the shaver
off. Press the release buttons to lift the shaver foil
(do not remove the foil completely). Switch on the shaver
for approx. 5-10 seconds so that the shaved stubbles
can fall out.
For a thorough cleaning (weekly), remove the shaver
foil and tap it out on a flat surface. Using the brush, clean
the cutter block and the inner area of the pivoting head.
If your skin is very dry and you notice a reduced
operation time of the shaver or if the display shows «oil!»,
apply a drop of light machine oil onto the shaver foil.
Replacing the shaving parts
To maintain 100% shaving performance, replace your
foil and cutter block every 18 months or when worn.
Change both parts at the same time for a closer shave
with less skin irritation.
(Shaver foil and cutter block: part No. 7000)
Accessories
Available at your dealer or Braun Service Centers:
Shaver foil and cutter block (part No. 7000)
Environmental notice
This appliance is provided with nickel-hydride batteries.
They do not contain any harmful heavy metals.
Nevertheless, in the interest of recycling raw materials,
please do not dispose of this appliance in the household
waste at the end of its useful life. Disposal can take place
at a Braun Service Center or appropriate collection sites.
oil
10
10
7000
Syncro
7000
5491311_S 4-38 Seite 9 Donnerstag, 27. Oktober 2005 3:13 15