Sena Bluetooth SR10 v1.2 User's Guide - Manual (Page 13)

14
5.1 Bluetooth Headset Pairing
1. Turn on your Bluetooth headset and enter pairing mode,
following the Bluetooth headset manual.
2. Turn on the SR10 and press and hold the Pairing Button for 5
seconds until the LED flashes red and blue alternatively.
3. When the pairing is successful, the blue LED flashes slowly.
5.2 Bluetooth Mobile Phone Pairing
1. Turn on the SR10 and press and hold the Pairing Button for
8 seconds until the red LED is rapidly flashing. Search for
Bluetooth devices on your mobile phone. The SR10 will be listed
on your mobile phone.
2. Enter 0000 for the PIN. (Some mobile phone may not ask for
the PIN.)
3. The SR10 will be paired as “headset”. This profile is normally
recommended for most mobile phones.
4. When pairing is done, the red LED flashes slowly.
5. PAIRING THE SR10 WITH
BLUETOOTH DEVICES