Sena Bluetooth SR10 v1.2 User's Guide - Manual (Page 16)

English
17
6.4 Using Mobile Phone
6.4.1 For Bluetooth Wireless Connection
When the SR10 is paired with a Bluetooth headset and a
Bluetooth mobile phone, the Bluetooth headset will provide
Hands-Free Profile for your mobile phone. The SR10 redirects
mobile phone calls and two-way radio communications to the
Bluetooth headset simultaneously so that a Bluetooth headset
could be used for both the mobile phone and hand held two-way
radio.
6.4.2 For Wired Connection
Users can connect a mobile phone to the AUX2 Port by wire
in order to use Bluetooth handsfree. In this case, the SR10
combines audio from the Main Port and the AUX2 Port together
and redirects to the Bluetooth headset. For information on
mobile phones and cable compatibility, please visit www.
senabluetooth.com/support.
6.5 Audio Channel Open and Close
As soon as incoming audio signal from the wired devices (two-
way radio, mobile phone, GPS or radar detector) is detected
by the SR10, the SR10 immediately makes a connection to the
Bluetooth headset and consequently users can hear a certain
sound. The examples of triggering audio signals are sound of
the two-way radio incoming signal, GPS voice instruction, radar