Sena Bluetooth SMH5-FM v1.3 User's Guide - Manual (Page 11)

SMH5-FM
12
6. PAIRING THE SMH5-FM WITH BLUE-
TOOTH DEVICES
Before using the SMH5-FM Bluetooth headset with any of Bluetooth
devices for the first time, you need to do the pairing operation. It can
be paired with Bluetooth mobile phones, Bluetooth stereo devices
such as MP3, or motorcycle specific Bluetooth GPS, and with other
Sena Bluetooth headsets. This pairing operation is only required once
for each Bluetooth device, and the headset will remain paired with
the devices and automatically connects to the paired devices again
when they are within range. You will hear a high tone single beep
and a voice prompt when the headset connects to the paired device
automatically: “Phone connected” to a mobile phone, “Media
connected” to a Bluetooth stereo device.
6.1 Mobile Phone Pairing
6.1.1 Mobile Phone Pairing
1. Turn on the SMH5-FM and press the Phone Button for 5 seconds
until the LED flashes red and blue alternately and you hear multiple
beeps. You will hear a voice prompt saying “Phone pairing”.
2. Search for Bluetooth devices on your mobile phone. Select the
Sena SMH5-FM in the list of the devices detected on the mobile
phone.
3. Enter 0000 for the PIN. Some mobile phones may not ask for the
PIN.
4. The mobile phone confirms that pairing has completed and the
SMH5-FM is ready to use. You will hear a voice prompt saying
“Your headset is paired”.
5. If the pairing process is not completed within three minutes, the
SMH5-FM will return to stand-by mode.
6.1.2 Multipoint Mobile Phones Pairing
You can simultaneously use two mobile phones which use the mobile
phone profile.
1. You can pair the first mobile phone to the SMH5-FM by following
the simple procedures in “6.1.1 Mobile Phone Pairing”.
2. To pair the second mobile phone, press the Jog Dial for 5 seconds
again until the red LED is rapidly flashing and you hear multiple
beeps.
3. Within 2 seconds, tap the Phone Button again, then the LED turns
to blue flashing and the beeps turn to high tone double beeps. You
will hear a voice prompt saying “Multipoint pairing”.
4. Search for Bluetooth devices on your mobile phone. Select the Sena
SMH5-FM in the list of the devices detected on the mobile phone.