Sena Bluetooth SMH5-FM v1.3 User's Guide - Manual (Page 15)

SMH5-FM
16
8. PAIRING WITH OTHER SMH5-FM HEADSETS
FOR INTERCOM CONVERSATION
The SMH5-FM can be paired with up to three other headsets for
Bluetooth Intercom conversation.
1. Turn on the two SMH5-FM headsets (A and B) that you would like
to pair with each other.
2. Press and hold the Jog Dial of the headset A and B for 5 seconds
until red LEDs of the both units start to flash rapidly. You will hear a
voice prompt saying “Intercom pairing”.
3. Simply tap the Jog Dial of any one of the two headsets A or B (It
doesn’t matter that you choose A or B) and wait until the LEDs of
both headsets turn to blue and intercom connection is automatically
established. The two SMH5-FM headsets A and B are paired with
each other for intercom conversation. If the pairing process is not
completed within one minute, the SMH5-FM will return to stand-by
mode.
A
B D
C
Pairing A & B
4. You can make other pairings between the headset A and C, and
between the headset A and D by following the same procedure as
above.
A A
B B D D
C C
Pairing A & C Pairing A & D