Sena Bluetooth SMH5-FM v1.3 User's Guide - Manual (Page 20)

English
SMH5-FM
21
10.6 Exit Voice Configuration Menu
Voice Prompt “Exit configuration”
Factory Default N/A
Enable Tap the Phone Button
To exit voice configuration menu and get back to stand-by mode,
rotate the Jog Dial until you hear a voice prompt saying
“Exit
configuration”, and tap the Phone Button to confirm. Tapping the
Jog Dial is not available for this setting.
Rotate Jog Dial Tap Phone Button Tap Jog Dial
Speed Dial Execute N/A
RDS AF Enable Disable
VOX Phone Enable Disable
Voice Prompt Enable Disable
Delete All Pairings Execute N/A
Exit Configuration Execute N/A
Voice Configuration Menu & Button Operations
11. USING THE SMH5-FM
11.1 Volume Adjustment
You can easily adjust the volume by rotating the Jog Dial. You will
hear a beep when the volume reaches maximum or minimum level.
The volume is set and maintained independently at different levels
for each audio source even when you turn off and on the headset.
For example, once you set the volume for mobile phone handsfree,
it will not change even if you adjust the volume when you hear
Bluetooth MP3 music. So you can always maintain the preferred
optimum volume level for each audio source.
11.2 Mobile Phone Call Making and Answering
1. When you have an incoming call, simply tap the Jog Dial or the
Phone Button to answer the call.
2. You can also answer the incoming call by loudly speaking any
word of your choice if Voice Activated Phone Answering is enabled
(Refer to the next section for details).
3. To end a call, tap the Jog Dial or the Phone Button, or wait for the
called person to end the call.
4. To reject a call, press the Jog Dial for 2 seconds until you hear a
beep while the phone is ringing.