Start-up and use – Hotpoint Ariston OK 1035 EL D.20 X /HA User Manual

Page 26

Advertising
background image

26

GB

! The first time you use your appliance, heat the
empty oven with its door closed at its maximum
temperature for at least half and hour. Make sure
that the room is well ventilated before switching the
oven off and opening the oven door. The appliance
may emit a slightly unpleasant odour caused by
protective substances used during the
manufacturing process burning away.

! To make the setting process easier, press and
hold the

+

and

-

buttons to scroll through the

numbers on the display rapidly.

! Each setting will automatically be stored in the
appliance memory after 10 seconds.

! During operation, we recommend the removal of
any crockery or delicate foodstuffs from the cavities
not being used.

! Once cooking has begun, before the DIVIDER is
removed, the oven must be switched off using the

button.

! Every time the oven is switched on it is set to the
CREATION cooking mode.

! The touch controls cannot be activated if the user
is wearing gloves.

Control panel lock

! The control panel can be locked while the oven is
off, once cooking has started or finished and during
programming.

To lock the oven controls, press and hold the
button for at least 2 seconds. A buzzer will sound
and the TEMPERATURE display shows the key
symbol “O—n”. The

icon will light up to indicate

lock activation.
To deactivate the lock, press and hold the
button again for at least 2 seconds.

Setting the clock

! The clock can only be set when the oven is
switched off. If the oven is in standby mode,

pressing the

button once will display the current

time setting. Press it again to set the time.

After connection to the power supply network or after

a blackout, the

button and the digits on the

TIME display will flash for 10 seconds.
To set the clock:

1. Press button

.

Start-up and use

2. Adjust the hour figure using the

+

and

-

buttons.

3. Once you have reached the correct hour value,

press the

button.

4. Repeat the above process to set the minutes.
If a blackout occurs, it will be necessary to reset the

clock. If the

icon flashes on the display, this

indicates that the clock has not been set correctly.

Setting the minute minder

! The minute minder may be set regardless of
whether the oven is switched on or off. It does not
switch the oven on or off.

When the set time has elapsed, the minute minder
emits a buzzer that will automatically stop after 30
seconds or when any active button on the control
panel is pressed.
To adjust the minute minder, proceed as follows:

1. Press button

.

2. Set the desired time using buttons

+

and

-

.

3. Once you have reached the desired value, press

the

button again.

The lit

symbol will remind you that the minute

minder is on.

To cancel the minute minder, press the

button

and use the

+

and

buttons to set the time to

00:00. Press the

button again.

The

icon will switch off to indicate that the

minute minder has been disabled.

Cooling ventilation
In order to cool down the external temperature of the
oven, a cooling fan blows a stream of air between
the control panel and the oven door, as well as
towards the bottom of the oven door.
! Once cooking has been completed, the cooling fan
continues to operate until the oven has cooled down
sufficiently.

Oven light
The light comes on when the oven door is opened or
when a cooking mode starts.
When models featuring LED INSIDE technology
begin cooking, the LEDs on the door light up for
improved illumination of all cooking levels.

The

button can be used to switch on the light at

any time.

Advertising