Hotpoint Ariston OK 1035 EL D.20 X /HA - Manual (Page 27)

GB
27
Residual heat indicators
The appliance is fitted with a residual heat indicator.
When the oven is off, the “residual heat” light on the
display comes on to indicate high temperatures
inside the oven cavity. The indicator light switches
off when the inside of the oven has cooled down.
Demo mode
The oven can operate in the DEMO mode: all heating
elements are deactivated, and the controls remain
operative.
To activate DEMO mode, press and release button
, then buttons
+
and
-
simultaneously for 6
seconds, and then press and release button . A
buzzer sounds and the TEMPERATURE display
shows “dEon”.
To deactivate DEMO mode, when the oven is off
press and hold button and button
-
simultaneously for 3 seconds. A buzzer sounds and
the “dEoF” message disappears from the display.
Restoring the factory settings
The oven factory settings can be restored to reset all
selections made by the user (clock and customised
durations). To carry out a reset, switch off the oven,
then press and hold the button corresponding to the
first manual cooking mode (top left) and the
button simultaneously for 6 seconds. Once the
restore procedure is complete, a buzzer will sound.
The first time the button is pressed, the oven will
behave as if it is being switched on for the first time.
Standby
This product complies with the requirements of the
latest European Directive on the limitation of power
consumption in standby mode. If no buttons are
pressed for 30 minutes and the control panel/door
lock has not been activated, the appliance
automatically reverts to standby mode. Standby
mode is indicated by the high luminosity “Clock
button” light. As soon as interaction with the
machine resumes, system operation is restored.