Crown Audio IQ-USM 810 - Manual (Page 8)

Page 8
IQ-USM 810 IQ Digital Processor / Digital Mixer
IQ-USM 810 Reference Manual
1 Welcome
Thank you for purchasing the Crown ® IQ-USM 810. The
IQ-USM 810 is a true 8x10 mixer that also provides
very unique dual input processing paths, making it two
complete eight-channel mixers in one chassis. In addi-
tion, every input and output channel includes a full
complement of signal processing as well as auto-mix-
ing features to offer a complete “system-in-a-box” solu-
tion. As an
IQ ® component, it can be controlled by an
IQ System ® , and with its distributed intelligence™ ca-
pability, continue to operate even when an IQ System is
not connected. The IQ-USM 810 can also act as a
system interface to other IQ components.
The IQ-USM 810 features high-quality 24-bit A/D and
D/A converters along with 240MIPS of full 32-bit float-
ing point DSP for optimum dynamic range.
Each of the eight balanced inputs is fully adjustable for
any mic- or line-level source and is processed through
adjustable signal delay and filtering before being split
into the two separate “A/B” Processing Sections. The
A/B Processing Sections include advanced algorithms
for gating, auto-leveling, filtering, compression and
automixing. Automixing functions include NOM (Num-
ber of Open Mics) Attenuation, Priority Ducking, and
Adaptive Gating processing. Each of the sixteen A/B
Processing Sections is then processed by a full 8x8
Matrix Mixer that allows any combination of routing and
mixing from any input to any output. The Matrix Mixer
outputs are routed to eight AUX Audio Outputs. The
Main and AUX Audio Output sections further process
the signal with individually adjustable signal delay and
filters along with an Ambient-Leveler and a high perfor-
mance Output Limiter for system protection.
All of the IQ-USM 810 parameters are backed up via
reliable FLASH Memory. System configurations may be
stored for recall from any of thirty-two system presets
from the front panel control or via
IQ for Windows
Figure 1.1 The IQ-USM 810
software. The unit is controllable by IQ for Windows
software (version 4.1 or later) via IQ Bus, standard RS-
232 serial port, or over Ethernet (with
IQNET Server
software). It may also be controlled by third-party sys-
tem controllers from companies such as AMX and
Crestron. A Multi-Function Control Port implements
analog and digital I/O for control and monitor by simple
potentiometer and switch wall controllers and indicator
panels.
This manual will help you successfully install your unit,
and describes the capabilities of the IQ-USM 810.
Please read all the instructions, warnings and cautions
contained within it. Consult the IQ for Windows soft-
ware documentation for descriptions of the software
controls for this unit. Also, for your protection, please
send in the warranty registration card today. And save
the bill of sale—it is your official proof of purchase.
1.1 Unpacking
Please inspect the unit for any damage that may have
occurred during transit. If damage is found, notify the
transportation company immediately. Only you, the
consignee, may initiate a claim with the carrier for
shipping damage. Crown will cooperate fully as
needed. Save the shipping carton as evidence of dam-
age for the shipper’s inspection.
Please save all packing materials. NEVER SHIP THE
UNIT WITHOUT THE FACTORY PACK.
-12 dB -12 dB -12 dB -12 dB 0 dB 0 dB 0 dB 0 dB +9 dB +9 dB +9 dB +9 dB