Anchor Audio Liberty Platinum - Manual (Page 2)

MADE IN USA
SIX YEAR WARRANTY
Liberty Platinum Sound System Owners Manual
For System Setup & Operation Videos Visit Our Website: www.anchoraudio.com
2
BACK PANEL OF LIB-7500MU2
BACK PANEL OF LIB-7500C
with optional CD option installed
BASIC SYSTEM OPERATION
NOTE: Fully Charge Batteries Before First Use!
IMPORTANT: Make all connections with shielded cables to avoid
hum, buzzing or interference.
1. Set all Input Levels to minimum & Tone Controls to flat
(middle) setting
2. Plug wired microphone into the MIC 1 or MIC 2 jacks
and/or any audio source into the LINE-IN jacks
3. Switch POWER to ON, Power ON LED will light
4. Slowly increase Level Controls for active Input Jacks
to desired volume
5. Adjust Tone Controls for desired sound quality
WIRELESS RECEIVER CONTROLS
MIC LEVEL CONTROLS
POWER SWITCH
AC POWER CORD INLET
MP3 PLAYER CONTROLS
CD PLAYER CONTROLS
VOICE OVER BUTTON
ON - Button In / Off - Button Out
MP3 VOLUME/LINE IN LEVEL CONTROL
TONE CONTROLS
BASS/TREBLE
LINE OUT – OUTPUT JACK
Balanced 1/4” and dual RCA provide a
combined output of all active system inputs.
Record your presetation or connect to
another powered sound system.
UNIVERSAL MIC – INPUT JACKS
Balanced XLR – low impedance,
for balanced mic, powers
condenser-type microphones.
Unbalanced 1/4” – high
impedance, for unbalanced
microphones, no phantom power.
LINE IN – INPUT JACKS
1/8” (3.5 mm) jack is used to hook up a portable CD,iPOD,Laptop or other external audio source.
The 1/4” unbalanced and dual RCA Inputs can be used to daisy-chain multiple Liberty speakers.
SPEAKON OUTPUT JACK
CHARGE STATUS LEDS (AC/DC Only)
GREEN: Charge Complete
AMBER: Nearly Complete
RED: Charging has Begun
BATTERY EMPTY LED (AC/DC Only)
RED: Charge Battery Immediately
POWER ON LED
GREEN:
Power On
DC OUT - 12V 500mA
To charge/power external device
USB DC OUT - 5V 500mA
To charge/power external device