Liberty platinum sound system owners manual, Using the built-in mp3 player, Using the built-in cd player – Anchor Audio Liberty Platinum User Manual

Page 4: The lcd displays functions as used

Advertising
background image

MADE IN USA

SIX YEAR WARRANTY

Liberty Platinum Sound System Owners Manual

For System Setup & Operation Videos Visit Our Website: www.anchoraudio.com

ExTERNAL ACCESSORY

VOLUME CONTROL

ExTERNAL ACCESSORY

VOLUME CONTROL

REMOTE CONTROL

USING THE BUILT-IN MP3 PLAYER

Your MP3 player supports WMA and WAV files as
well as MP3. Input slots for play are USB, SD card
slot and AUX port for other music player devices.

Insert your memory card or USB stick and turn on
the MP3 POWER. Push MODE button until your
device is displayed. The auxilliary port becomes
active when 3.5mm cable is inserted.
*MP3 player does not have remote

USING THE BUILT-IN CD PLAYER

Your CD player supports CD, CD-R, CD-R/W and
MP3.
*CD player has remote

The LCD displays functions as used:

POWER: press once for ON or OFF

MODE: displays mode of operation
MUTE: press once for mute ON and again to

mute OFF

RPT: press and release to repeat song
TRACK+: press and release to next track
TRACK-: press and release for previous track
ALBUM+: press and release for next album or hold and

release until correct album is found

ALBUM-: press and release for previous album or hold and

release until correct album is found

The LCD displays functions as used:

PLAY/PAUSE: press once for PLAY or PAUSE
STOP: press once for STOP
CUE: press for the next track
REV: press for the previous track
FOLDER : press for the next folder
FOLDER : press for the previous folder
REPEAT: press to repeat last track, press again to

repeat all

EJECT: press to eject

PROG: set the programming mode

CHANNEL SELECTION - BUILT-IN RECEIVER
Select a channel, set the built-in receiver & microphone transmitter
to that channel before using your wireless system.

1. Choose any available wireless channel from 1 thru 16

(see page 5 for transmitter instructions)

2. Set the Wireless Channel Selection Knob to the channel you

choose in step 1

WIRELESS 2
VOLUME CONTROL

WIRELESS 1 CHANNEL
SELECTION

WIRELESS 1 RX

INDICATOR LIGHTS

WIRELESS 2 RX
INDICATOR LIGHTS

WIRELESS 1

VOLUME CONTROL

WIRELESS 2 CHANNEL

SELECTION

DIVERSITY WIRELESS BY ANCHOR AUDIO

Anchor Audio UHF wireless is a 16 channel, diversity wireless system that receives signals with two independent antennae. With diversity
wireless the receiver processes the stronger signal, effectively minimizing dropouts and interference from other transmitting sources. The
antennae are mounted internally so there are no obstructions or risk of damage.

NOTE: Ongoing wireless interference? The frequency you selected may be in use by other systems in the area!

Change channels until you find a clear frequency!

If you have two wireless receivers repeat above for the second receiver.
Remember, each receiver/transmitter pair must be set to different
channels to avoid interference.

4

ALBUM + REPEAT

TRACK +

TRACK -

MUTE

ALBUM -

MODE

POWER

AUX IN

SD CARD

MP3 PLAYER

STOP

REV SKIP

FOLDER

PLAY/PAUSE

REPEAT PROG

EJECT

CUE

REMOTE

PLAY

PAUSE

STOP

1

2

3

4

5

6

7

8

0

9

PROG

ID3

ESP

FOLDER

REPEAT

EJECT

MUTE

A-B

REV

SKIP CUE

*Remote follows same functions
as CD player

Advertising