Anchor Audio Liberty Platinum - Manual (Page 3)

MADE IN USA
SIX YEAR WARRANTY
Liberty Platinum Sound System Owners Manual
For System Setup & Operation Videos Visit Our Website: www.anchoraudio.com
3
CONTROLLING FEEDBACK
Feedback, a howling noise or shrill sound, is self-generated by the sound system. It’s caused by
a microphone picking up the sound coming from the speaker and then re-amplifying it. Once a
feedback loop starts, it continues until the system is adjusted.
FEEDBACK CAUSES
• Microphone too close, pointing towards
or in front of speaker
• Volume setting is too loud for room
• Sound reflecting off hard surfaces
AVOIDING & ELIMINATING FEEDBACK
• Point microphone in a different direction
• Keep microphone away from the speaker
• Place speaker in FRONT of the microphone
• Reduce the sound system volume levels
CAUTION: Feedback can damage your equipment & may be hazardous to hearing.
CORRECT SYSTEM PLACEMENT WRONG SYSTEM PLACEMENT
UNPOWERED COMPANION SPEAKER
One powered Liberty sound system and one unpowered Liberty companion
speaker. Using a speaker cable
(SC-50NL) connect the SPEAKER OUTPUT jack
on the powered system to the IN jack on the unpowered speaker.
POWERED SOUND SYSTEMS
Two or more powered Liberty Sound Systems. Using a speaker cable
(EX-50PP)
connect the LINE OUT jack on the first powered Liberty to the LINE IN jack on
the second powered Liberty. Set second Liberty volume to maximum so full
volume control will be at the first or primary sound system.
CONNECTING MULTIPLE SOUND SYSTEMS
NOTE: AC power is not required for an unpowered companion speaker.