Anchor Audio AN-MINI_MiniVox Lite - Manual (Page 3)

MADE IN USA
SIX YEAR WARRANTY
AN-Mini/MiniVox Lite Owners Manual
For System Setup & Operation Videos Visit Our Website: www.anchoraudio.com
DIVERSITY WIRELESS BY ANChOR AUDIO
Anchor Audio UHF wireless is a 16 channel, diversity wireless system that receives
signals with two independent antennae. With diversity wireless the receiver processes
the stronger signal, effectively minimizing dropouts and interference from other
transmitting sources. The antennae are mounted internally so there are no obstructions
or risk of damage.
NOTE: Ongoing wireless interference? The frequency you selected may be in use by other
systems in the area! Change channels until you find a clear frequency!
3
UHF WIRELESS
CHANNEL SELECTION
RX INDICATOR LIGHTS
UHF WIRELESS VOLUME CONTROL
Model Shown: AN-MINIU1
ChANNEL SELECTION - BUILT-IN RECEIVER
Before you can use your UHF wireless system, you will need to select a wireless
frequency, set the built-in receiver, and microphone transmitter, to that channel.
1. Choose from any of the 16 available wireless channels
2. Set the wireless channel selection knob “CHANNEL” to the channel/frequency you
have chosen
AN-MINI WIRELESS CONTROLS
USING AN OUTBOARD MP3/CD/TAPE PLAYER
Use the LINE IN input jack to play pre-recorded material through the AN-Mini. The AN-Mini volume
knob controls both the audio source and microphone levels when used simultaneously.
1. Connect a mini-to-
mini patch cable
(3.5mm plugs) to the
‘Line’ or ‘Headphone’
output of your audio
source
2. Connect the other
end to the LINE IN
input jack on the
AN-Mini control panel
3. Adjust the volume
setting of the audio
source to the desired
level
ShIELDED PATCh
CABLE*
AUDIO SOURCE
hEADPhONE / OUTPUT JACK
LINE IN
INPUT JACK
*CABLE SOLD SEPARATELY