Anchor Audio AN-MINI_MiniVox Lite - Manual (Page 5)

MADE IN USA
SIX YEAR WARRANTY
AN-Mini/MiniVox Lite Owners Manual
For System Setup & Operation Videos Visit Our Website: www.anchoraudio.com
5
NOTE: System Can Be Used During Charging!
REChARGEABLE BATTERY KIT (OPTIONAL ACCESSORY)
For applications where the AN-Mini PA system is used frequently, the RC-30 rechargeable battery kit
is available. This kit includes 10 rechargeable NiMH batteries and an AC charging adapter. When
fully charged the batteries provide approximately 12 hours of operation.
NOTE: New batteries must be charged for 6 hours prior to first use.
Using the RC-30 Recharge Kit
1. Install the 10 rechargeable NiMH batteries into the AN-Mini (see above - Battery Installation)
2. Insert the charger plug into the Input Jack labeled DC IN on the AN-Mini control panel
3. Plug the AC adapter into a power outlet for 4-6 hours to fully charge
Cycling the Batteries
For extended battery life, we recommend you fully charge the batteries once each month during
periods of infrequent use. Always fully recharge batteries before storing.
CAUTION: NEVER recharge other types of batteries. Doing so can result in battery
explosion. Use only rechargeable Nickel-Metal Hydride (NiMH) batteries.
1. Remove the battery compartment cover located
underneath the control back panel of the AN-Mini
by pressing down the lock tabs of the battery
compartment cover
2. Slide out the battery pack from the AN-Mini
battery compartment
3. Insert ten ‘AA’ size batteries (alkaline or RC-30
rechargeable batteries) into the battery pack
Position the ten battery tubes into the battery pack
by following the polarity labels on the battery pack
4. Slide-in the battery pack into the battery
compartment Push the battery pack all the way in
5. Replace the battery compartment cover and push
cover to lock tabs in place
BATTERY INSTALLATION
REPLACE BATTERY - hANDhELD TRANSMITTER
1. Unscrew battery cover on bottom of microphone
2. Replace old batteries with two fresh size ‘AA’
alkaline batteries
3. Replace battery cover and tighten firmly
REPLACE BATTERY - BODY-PACK TRANSMITTER
1. Slide open battery cover on front of transmitter
2. Replace old batteries with two fresh size ‘AA’
alkaline batteries
3. Replace battery cover by sliding firmly into place
RC-30 Rechargeable Battery Kit