Braun 4740 TriControl - Manual (Page 7)

7
• Using the brush, clean the cutter block and
the inner area of the shaver head. However,
do not clean the shaver foil with the brush
as this may damage the foil.
Keeping your shaver in top shape
About every four weeks, clean the cutter block
with Braun cleaning agents. Put a drop of light
machine oil onto the long hair trimmer and the
shaver foil.
Preserving the batteries
In order to maintain the optimum capacity
of the rechargeable batteries, the shaver
has to be fully discharged (by shaving) every
6 months approximately. Then recharge the
shaver to full capacity. Do not expose the
shaver to temperatures higher than 50 °C for
extended periods of time.
Replacing the shaving parts
To maintain 100% shaving performance,
replace your foil and cutter block at least every
18 months or when worn. Change both parts
at the same time for a closer shave with less
skin irritation.
(Shaver foil and cutter block: part no. 4000).
Environmental notice
This appliance is provided with nickel-
cadmium rechargeable batteries. To
protect the environment, do not dispose
of this appliance in the household waste
at the end of its useful life. Disposal can take
place at a Braun Service Centre or appropriate
collection sites.
However, if you prefer to dispose of the
appliance yourself, remove the batteries as
shown on page 30.
Subject to change without notice.
This product conforms to the European
Directives EMC 89/336/EEC and Low
Voltage 73/23/EEC.
Electric specifications see printing on the
special cord set.
At the end of the product's useful life,
please dispose of it at appropriate
collection points provided in your
country.
Cd
5714320_4745/40_MN_S4-42 Seite 7 Dienstag, 19. April 2005 8:28 08