SENA LS100 - Manual (Page 10)

10
Figure 2-1 The panel layout of the LS100
2.2 Connecting The Hardware
This section describes how to connect the LS100 to serial device for the first time test.
- Connect the power to the LS100
- Connect the Ethernet cable between the LS100 and Ethernet hub or switch
- Connect the serial data cable between the LS100 and a serial device
2.2.1 Connecting The Power
Connect the power jack to the LS100 power jack using DC power adapter included in the package. If
the power is properly supplied, the [Power] lamp of the LS100 will maintain solid red.