Aqua-Pure AP-DWS1000 - Manual (Page 2)

1
Specifications:
Inlet/Outlet Size: 1/4” Tube with Quick Connect Fittings Flow Rate: 0.6 gpm (2.3 lpm)
Temperature Range: 40-100°F (4.4-38°C) Pressure Range: 30-125 psi (207-862 kPa)
Capacity: 625 gallons (2,366 liters) Weight: 7 lbs (3.2 kg)
Dimensions: 10 7/8”H x 15 3/4”W x 4 1/4”D (28 cm x 40 cm x 11 cm)
Parts Included
Model AP-DWS1000 Drinking Water System
• Drinking water system bracket assembly (includes heads, connections, shutoff meter)
• Filter cartridge #1 (AP-DW80)
• Filter cartridge #2 (AP-DW90)
• Saddle valve assembly • Faucet assembly (with blue tubing)
• Tubing (yellow) • Mounting hardware
• Installation, Operation and Maintenance Manual
NOTE: Model AP-DWS1000 LF (Less Faucet) does not include tubing to connect filter system to a drinking
water faucet. The filter system’s outlet connection will accept 1/4” plastic or copper tubing.
Tools Required (not included):
• Drill (cordless recommended) • Phillips head screwdriver
• Adjustable wrench • Razor knife or tube cutter
• #8 Gauge fastening screws appropriate for mounting surface
If a faucet hole needs to be drilled for faucet:
• Center punch • File or grinding wheel
• 9/16” Drill bit (suitable for countertop materials or cast iron/stainless steel)
Note: Some state and local plumbing codes may prohibit the use of saddle-type valves and/or drain
connections. The use of saddle-type valves are prohibited in: Alaska, Delaware, Idaho, Kentucky,
Massachusetts, Michigan, Minnesota, New Hampshire, North Dakota, Ohio, Oregon, and South Dakota. Check
your local plumbing codes for any restrictions that apply.
Massachusetts CMR 248 strictly prohibits the use of saddle-type valves. The feedwater connection must
conform to applicable plumbing codes.