Aqua-Pure AWS150M User Manual
Page 18
This level of programming is accessible by pressing the SET button.
The UP and DOWN arrows will step through the settings.
Time of day
Day of week
Time of regeneration
Number of days between regeneration (99 day calendar override timer)
Amount of salt used per regeneration
System
capacity
Hardness
To make changes:
• Time of day
When the Time of Day is displayed, push SET. The time will fl ash. Use the arrow buttons to increase/decrease the time. Push SET to enter the selection.
• Days of the week
The day of the week does not have a default setting. It is entered at Power-up. To change the current day, push SET when day of week is displayed. A fl ag will fl ash
beneath the current day. Use the arrow buttons to change. Push SET to enter the selection.
• Time of Regeneration
This is set for 2:00 AM as the default. The controller does not account for daylight savings time.
To change this setting, push SET. Use the arrow buttons to increase/decrease the time. Push SET to enter the selection.
3-2
Figure 16
Figure 17
Figure 18