OSRAM OPTOTRONIC OT EASY 60 II - Manual (Page 14)

14
IV 2009
OT EASY 60 Operation
Storing and calling up a lighting scene
„Scene 1“ to „Scene 4“ buttons.
Proceed as follows to store lighting scenes:
Step Task
1 Set the brightness of the luminaire group; see "Changing the brightness
manually".
2 Press the desired button for at least 3 seconds.
3
Confirmation: luminaires flash.
To call up a lighting scene:
2x
max
1 2 3 < 30 s
1 2 3
1 2 3
A
B
...
Via short press.
Disabling scene storage
Storing of scenes can be disabled by means of the DIP switches in the remote control
or in the pushbutton coupler.
Storing scenes Remote control Pushbutton coupler
Disabled DIP switch 2 = OFF DIP switch 1 = OFF
Enabled DIP switch 2 = ON DIP switch 1 = ON
Starting and ending the sequencer mode
2x
max
1 2 3 < 30 s
1 2 3
1 2 3
A
B
...
Via short press.
•
To start and continue the sequencer mode: „Start/time+“ button
•
To stop the sequencer mode: „Stop/time
−“ button
•
To end the sequencer mode: „Ch1“ to „Ch4“, „Scene 1“ to „Scene 4“ or „On/Off dim-
ming“.