Draw-Tite 1040300 CARGO CARRIER - ECONOMY - Manual (Page 2)

ITEM:
DESCRIPTION:
1040300N REV D 3-21-11
PRINTED IN CHINA
1040300
CARGO CARRIER 60” X 20”
Cequent Performance Products, Inc.
Plymouth, MI 48170
CORRECT INCORRECT
WARNING
• Not for transport of people, animals, or flammable liquids.
• If the load or cargo carrier blocks or impairs visibility of the taillights or turn signals, use optional light kit
(part #6504).
• If license plate is blocked by load or cargo carrier, relocate using existing holes.
• If the cargo carrier or the contents being transported is in line with the exhaust outlet, an exhaust tip must be
used to redirect the exhaust flow away from the cargo platform or contents.
• Do not lubricate threads.
• Bolt failure may occur due to over tightening.
• Securely fasten load to cargo carrier.
• Check security of load, fasteners, pin, & clip at all fuel and rest stops.
• Severe bumps can damage your towing vehicle, hitch, and cargo carrier. Drive slowly on rough roads.
• Stop and make a thorough inspection if your cargo carrier strikes the road. Correct any problems before
resuming travel.
• Do not cut, drill, weld, or modify this product.
• Do not carry loads wider than your vehicle.
CAUTION
• The cargo carrier load rating is the LOWEST of the following:
• Cargo carrier rating (500 lb with 2” Shank, 300 lb with 1-1/4” Shank)
• Hitch tongue weight rating
• Vehicle manufacturer tongue weight rating
• The center of gravity of load must be positioned within the middle third of platform.
2009 Cequent Performance Products
License plate/light
Kit Mounting holes
Tie Down holes (12 total)
Hitch Pin, 5/8”
Clip
(2)
Hitch Pin, 1/2”
Clip
1/2”x 3” Hex bolt,
1/2” flat washer
1/2”” Hex nut,
1/2” flat washer
Adaptor
Use Adaptor for 1-1/4” hitch.