Typical setup – Universal Audio Apollo User Manual
Page 22
Apollo Hardware Manual
Interconnections
22
Typical Setup
This diagram illustrates an Apollo setup that might be used by two musicians that are recording
simultaneously. In this setup, only analog devices are connected; digital I/O is not used.
The example shows an electric guitar and electric bass connected to the Hi-Z inputs, and microphones are
connected to XLR inputs of channel 3 and 4. A stereo keyboard instrument is connected to line inputs 5 and 6,
and an external FireWire hard drive is “daisy-chained” to Apollo’s second FireWire port. Both headphone
outputs are used during tracking and the left/right monitor outputs are connected to a loudspeaker system for
mixdown.
Key points for this example:
• Mic/Line switch for channels 3 and 4 are set to “Mic”
• Unique mixes can be sent to each headphone output for “more me” during tracking