Universal Audio Apollo - Manual (Page 31)

Apollo Hardware Manual Specifications 31
Monitor Outputs 1 – 2
Jack Type
¼” Male TRS Balanced
Frequency Response 20 Hz – 20 kHz, ±0.1 dB
Dynamic Range 115 dB (A–weighting)
Signal-to-Noise Ratio 114 dB (A–weighting)
Total Harmonic Distortion + Noise –103 dB
Channel Separation >120 dB
Stereo Level Balance ±0.05 dB
Output Impedance 600 Ohms
Output Gain Range -78 dBV to 18 dBV
Maximum Output Level 18 dBV
Stereo Headphone Outputs 1 & 2
Jack Type ¼” Male TRS Stereo/Unbalanced
Frequency Response 20 Hz – 20 kHz, ±0.1 dB
Dynamic Range 113 dB (A–weighting)
Signal-to-Noise Ratio 113 dB (A–weighting)
Total Harmonic Distortion + Noise –101 dB
Channel Separation >114 dB
Output Impedance 12 Ohms
Output Gain Range 0 dBV to 15 dBV
Maximum Output Level 80 milliwatts
DIGITAL I/O
S/PDIF
Jack Type
Phono (RCA)
Format IEC958
ADAT
Jack Type
Optical TOSLINK JIS F05
Format ADAT Digital “Lightpipe” with S/MUX
Channel Assignments @ 44.1 kHz, 48 kHz Port 1 = Channels 1 – 8, Port 2 = 1 – 8 (mirrored)
Channel Assignments @ 88.2 kHz, 96 kHz Port 1 = Channels 1 – 4, Port 2 = Channels 5 – 8
Channel Assignments @ 176.4 kHz, 192 kHz Port 1 = Channels 1 – 2, Port 2 = Channels 3 – 4
Word Clock
Jack Type BNC
Lock Range ±0.5% of any supported sample rate
Word Clock Input Termination 75 Ohms, switchable
Synchronization Sources
Internal, Word Clock, S/PDIF, ADAT
(continued)