SCANTECH ID (Champtek company) IG300BT - Manual (Page 14)

14
5. Operating Settings
5.1 Factory Default
Set Scanner /Cradle factory default
The scanner and cradle factory default settings are
shown with bold
< > in the following pages.
Reset all configuration parameters to their factory
default setting. After this reset you must select all
required parameters that meet applications.
5.2 Scanning Triggering
<Level>
Lighting and decoding are on when the trigger line is
activated (trigger pressed) and off when the trigger line
is deactivated (trigger released)
Continuous Scanning
When the scanner is turned on a continuous reading
session begins (lighting and decode processing on).