SCANTECH ID (Champtek company) IG300BT - Manual (Page 18)

18
5.4 Sleep Mode
The scanner is equipped with sleep mode function to
save battery energy when the scanner is not used for 1
minute or 10 minute. During sleep mode, all the
functions and connection will be halted until pressing
the trigger button of scanner to wake up and reconnect
the communication with the cradle or Bluetooth device.
<Sleep Mode 1 min. ON>
Sleep Mode 10 min. ON
Sleep Mode OFF
5.5 Batch Mode
This Batch mode function is enabled when you have
scanned “Memory ON” barcode. Scanning data is
stored in the memory of the scanner. This function is
disabled when you have scanned “Memory OFF”
barcode.
When you have scanned “Out Of Range” barcode,
The scanner transmits the scanning data of work range.
In case of the scanner is out of working range, the
scanner will store the scanning data to memory.
You can scan the barcode “Memory read” barcode to
transmit the stored data to cradle immediately of
working range.When the communication reconnected
again, you can scan the barcode “Memory read”
barcode to transmit the stored data to cradle
immediately. Or scan the “Memory clear” barcode to
erase all stored memory. The capacity of this memory
depends on the scanned data size, approximately
20,000 sets for EAN13 of data .